top of page
Grippers
The return-to-zero nut locks the collet and allows fine adjustment of tool runout via six screws, ensuring high-precision machining.
- Quick installation: No need to install other parts, improve work efficiency.
- Clamping capacity: Can directly clamp hexagonal bars, suitable for a variety of processing needs.
- Drive mode: Can be driven by coolant or compressed air to improve flexibility.
- Minimize waste: The clamping claw design can fit the fixture tightly, effectively reducing bar waste.
- Compatibility: Can be driven directly by machine cutting water, no additional power system is required.
- Low-pressure operation: Only 0.5 Bar pressure is required to operate, reducing energy consumption requirements.
Product specifications:
mini
0 - 38 mm
Small
2 - 52 mm
Standard
2 - 60 mm
3 - 80mm
7 - 105mm
Holding force(kg)
125
100
75
50
25
0
0.5
1.0
1.5
Water pressure (Bar)
Range | A | B | C | D | L |
|---|---|---|---|---|---|
Standard 2-60 mm | 64mm | 83mm | 89mm | 68mm | 71mm |
Standard 3-80mm | 83mm | 102mm | 94mm | 68mm | 71mm |
Standard 7-105mm(option) | 110mm | 129mm | 108mm | 68mm | 71mm |
Small 2-52mm | 54mm | 74mm | 86mm | 59mm | 64mm |
Mini 0-38mm | 39mm | 52mm | 61.5mm | 44mm | 49.50mm |
bottom of page